Product Technical Spec.
Body Style:
Cylindrical bushing mounted
Reliability Indicator:
Not established
Overall Length:
1.844 inches
Body Diameter:
2.000 inches
Shaft Diameter:
0.2497 inches
Shaft Length:
0.875 inches
Mounting Bushing Length:
0.375 inches
Body Length:
0.938 inches
Overall Diameter:
2.205 inches
Shaft Style:
Round, slotted
Shaft Bearing Type:
Sleeve
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
350.0
Maximum Starting Torque:
2.00 inch-ounces
Maximum Running Torque:
1.00 inch-ounces
Nonturn Device Location:
At 12 oclock
Nonturn Device Radius:
0.531 inches
Shaft End Play:
0.003 inches
Shaft Runout:
0.001 inches
Shaft Radial Play:
0.0015 inches
Screw Thread Diameter:
0.375 inches
Screw Thread Series Designator:
Unef
Screw Thready Qty Per Inch (tpi):
32.0
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Standard bushing
Electrical Resistance Per Section:
100.0 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section:
50.0 percent, rated amperes c and better finish
Electrical Resistance Per Section:
50.0 kilohms 1st section
Electrical Resistance Per Section:
100.0 kilohms 2nd section
Rotary Actuator Travel In Angular Deg:
350.0
Function Conformity Tolerance Per Section:
-0.30/+0.30 all sections
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
125.0 all sections
Power Dissipation Rating Per Section In Watts:
4.0 free air all sections
Function Conformity Per Section:
All sections independent linearity
Resistance Tolerance Per Section In Percent:
-3.0/+3.0 all sections
Resistance Tolerance Per Section In Percent:
-3.0 to 3.0 all sections
Actuator Travel Control Feature:
Stops
Function Characteristic Per Section:
All sections linear
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius:
-20.0/+20.0 all sections
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
70.0 all sections
Test Data Document:
49671-2187657 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
6 turret
Item Name:
Resistor,variable,sine
Cross Referenced Parts
No other part numbers with same form, fit, and function found.
